HLD6 60 mm Rotary Valve Syringe Pump
HLD6 / HLD6M 60 mm Stroke rotating Syringe Pump, Glass Syringe liquid aspiration and discharge, rotating different. This series 25 μL–25 mL Glass Syringe, is used for and is designed for and equipment. is used for, channel. When selecting, consider, connection and confirm RS-232, RS-485 CAN and equipment.
Typical Applications:
Syringe Pump technical details, Syringe Pump technical details, Syringe Pump technical details
| Product Series | HLD6 / HLD6M Rotary Valve Syringe Pump Series |
|---|---|
| Stroke | 60 mm |
| Number of Channels | 1 channel |
| Full-Stroke Travel Time | 1.2–9600 s |
| Linear Speed | 0.00625–60 mm/s |
| Resolution | Standard Mode: 6000 increments; Microstep Mode: 48000 increments |
| Valve Switching Time | Adjacent Ports ≤250 ms |
| Valve Configuration | Planar Rotary Valve / Cylindrical Rotary Valve |
| Standard Port | 1/4-28 UNF |
| Volume Range (Glass Syringe) | 25 μL–25 mL |
| Specification | Repeatability ≤0.05% (250 μL and above); ≤0.1% (100 μL and below) |
| Valve Configuration | Planar Rotary Valve: 3-way Non-Distribution Valve / 5-way Distribution Valve / 9-way Distribution Valve; Cylindrical Rotary Valve: 3-way Non-Distribution Valve / 9-way Distribution Valve |
| Rotary Valve Pressure Rating | 0.41 MPa / 0.7 MPa |
| Communication Type | RS-232 / RS-485 / CAN |
| Installation Dimensions (L × W × H) | 117 × 71.4 × 254 mm / 117.5 × 72.4 × 254 mm |
典型应用
HLD6 / HLD6M 的应用由注射器计量与阀选路共同决定。一个注射器可依次连接多个液源或目标端口，适合多步骤液体处理；需要重点管理共享流道中的残留。
多试剂分析：顺序选路与定量分配
分析流程可能依次使用试剂、稀释液和清洗液。旋转阀先选择所需液源，注射器取液后再连接目标路径完成排液。这一组件可称为多端口注射泵（multi-port syringe pump）或试剂分配模块（reagent dispensing module）。
应根据实际阀流路图确定可连接的液源与排液方向，并计算共享注射器和管路的置换量。不同试剂间切换时安排冲洗，避免仅靠切换端口就认为液路已清洁。
样本前处理：稀释液定量添加
向已知样本量中加入规定体积的稀释液，属于稀释加液（diluent dispensing）。设备可能将其称为稀释泵或配液模块，但稀释倍数仍取决于样本量、稀释液量及后续混合，而不是单独由泵名称决定。
HLD6 / HLD6M 可按目标液量选择注射器，并在设备控制中定义吸液补充、排液和混合步骤。较大的注射器可减少某些流程中的补液次数，但小体积输出的误差仍需在实际行程下确认。
方法切换：共享液路的置换与残留控制
在不同试剂共用注射器的分析流程中，切换端口后仍可能残留上一种液体。让清洗液流过共享路径称为冲洗（flushing）；正式工作前将液路充满、排除空气称为预充（priming）。两者都涉及走液，但验收目标分别是残留水平和充液状态。
HLD6 / HLD6M 可按已确认的阀流路选择清洗介质与排放路径。清洗方法应覆盖注射器、公共流道、输出管与针头；用空白液检查高浓度液体之后的携带污染（carryover），再确定清洗顺序和用量。
应用选型信息
请提供每份液量、每轮总液量和补液间隔，以及液源数量、清洗置换要求、背压和安装空间，以便确认注射器容量、阀端口与控制配置。
2D Drawing Not Available Yet
To request a 2D drawing for this product, please click “Add Drawing” above.
Datasheet not yet available
The datasheet for this product has not been uploaded yet.
Frequently Asked Questions
25 μL–25 mL Glass Syringe. and and Stroke. can reduce, steps; and Repeatability and.
Syringe pumps configured for your fluidic system
Share the syringe size, stroke, channel count, valve arrangement, communication interface, installation space, and fluidic integration requirements. The Foreach engineering team can help confirm a suitable configuration.