How do equal-size and reducing versions of reducing tee barbed fitting differ?

Equal-size versions accept the same tubing ID at every end. Reducing versions connect ends specified for different tubing IDs.

Does the barb size refer to tubing ID or OD?

The connection sizes on this page refer to the compatible tubing ID. Before assembly, also check the tubing material, hardness and dimensional tolerances.

Is PP compatible with my fluid?

Check compatibility for the fluid, operating temperature, pressure and cleaning requirements. If you are unsure, share these conditions with our engineers for review.

Can I request a 2D drawing for BT-16D-24D-24D-PP-N?

Yes. Add this model to your list and indicate that you need a drawing. Our engineers will confirm and provide the applicable version.

BT-16D-24D-24D-PP-N

BT-16D-24D-24D-PP-N is a reducing tee barbed fitting for splitting, combining or branching three tubing lines. The three ends accept tubing IDs of 1.6 / 2.4 / 2.4 mm, for reagent lines, wash lines and branches inside instruments. Material: PP. Color: natural. Check the tubing material, hardness and dimensional tolerances, then verify the fit under the intended assembly conditions.

Typical Applications:

Splitting or combining three tubing lines, Reagent and wash-fluid distribution, Branch connections inside instruments, Pump and valve tubing connections

Drawings and technical support

Click Default configuration to add or remove it; hover to view details.

Model	BT-16D-24D-24D-PP-N
Product Code	809287
Product Category	Barbed Fitting
Product Structure	T-Shaped
Connection Type	3-way reducing
Tube ID 1	1.6 mm
Tube ID 2	2.4 mm
Tube ID 3	2.4 mm
Material	PP
Color	Natural

Preparing 3D model

Frequently Asked Questions

It fits tubing with an ID of 1.6 mm / 2.4 mm / 2.4 mm. Use the actual tubing ID and verify the assembled fit when selecting the part.

Fittings for volume orders and custom applications

Foreach can support fitting selection, volume supply, and customization based on port type, tube size, material, sealing element, mounting structure, and application conditions.