FEP
FEP uses FEP (FEP)material, ID range 0.3 mm~2.0 mm, operating temperature range -230 °C~200 °C. RoHS material compliance documentation, the applicable documents depend on the material and project requirements.
Typical Applications:
Tubing technical details, Tubing technical details, equipment internal tubing, connection, Tubing technical details
Model:XXX-XXX-XX-XX
| Density (g/cm³) | 2.13 |
|---|---|
| Tensile Strength (MPa) | 27.6 |
| Flexural Strength (MPa) | 18.5 (ASTM D790) |
| Dielectric Strength (kV/mm) | 2.1 (IEC60243-1) |
| Water Absorption (%) | <0.01 (ASTM D570) |
| Hardness (Shore D) | 50, 60 |
| Operating Temperature (℃) | -230~200 |
| Coefficient of Thermal Expansion (cm/cm/°C) | 9.9X10⁻⁵ |
| Melting Temperature (°C) | 260 |
| Low-Temperature Brittleness (°C) | -250 |
No 2D Drawing
Datasheet not yet available
The datasheet for this product has not been uploaded yet.
Frequently Asked Questions
FEP is suitable for equipment connection, fluid, flow rate, temperature andpressure rangeconfirm.
requires Tubing and ?
fluid, flow rate, ID/OD, Tubing, fitting, operating temperature and pressure range. Foreach Tubing and confirm, fitting and whether.